To and From TUL

SH-11 bridge rehabilitation project in Tulsa; lanes, ramps narrowed

As part of a SH-11 bridge rehabilitation project in Tulsa scheduled for overall completion in late 2020, delays can be expected as lanes are narrowed during constructions. Drivers should plan ahead for extra travel time, especially those heading to the Tulsa International Airport complex.

Drivers should expect congestion along the Arrivals Roadway, especially in front of the baggage claim area for American and Delta. Airport law enforcement officers ask that drivers use caution when picking up passengers as elevated pedestrian traffic may cause minor delays. Only vehicles actively loading passengers will be allowed to stop at the curb. Drivers are encouraged to use the cell phone parking lot located east of the Hilton Garden Inn hotel until their arriving passengers collect their luggage and indicate they are ready at the curb. The cell phone lot provides over 60 spaces of free parking.

Drivers wanting to park and enter the terminal can now access short-term parking from the Arrivals Roadway, with a ramp entrance to the third level located in front of Southwest baggage claim. Drivers can also access short-term parking from the main garage entrance by following the signs to the third level. Designated short-term spaces are available on the front row of Level 3.

Get directions from your specific location from Google Maps

• From I-244 E, exit HW 11 W on the left. Once on HW 11 look for the exit marked Virgin St/Airport Terminal, follow the signs to the terminal (expect to follow detour for this route).
• From I-244 W, exit US 75 N. Exit HW 11 E towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal.
• From HW 169 N, exit onto I-244 west, from I-244 W exit HW 11 W via exit 12B towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal. Follow the signs and turn right on Airport Dr.
• From the Owasso / Collinsville areas, take HW 169 S, exit I-244 W, from I-244 W exit HW 11 W via exit 12B towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal. Follow the signs and turn right on Airport Dr.
• From the Broken Arrow area, take HW 64/51 W (Broken Arrow Expressway), exit HW 169 N, from HW 169 N, exit onto I-244 west, from I-244 W exit HW 11 W via exit 12B towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal. Follow the signs and turn right on Airport Dr.
• From the Glenpool / Okmulgee area, take HW 75 N, follow signs for I-244 W, from I-244 E, exit HW 11 E on the left. Once on HW 11 look for the exit marked Virgin St/Airport Terminal, follow the signs to the terminal.
• From the Sand Springs area, take HW 64/51 E (Broken Arrow Expressway), exit I-244 E, from I-244 E, exit HW 11 W on the left. Once on HW 11 look for the exit marked Virgin St/Airport Terminal, follow the signs to the terminal (expect to follow detour).
• From the Sapulpa area, take I-44 E, take the HW 75 N inter-change, exit I-244 E, From I-244 E, exit HW 11 W on the left. Once on HW 11 look for the exit marked Virgin St/Airport Terminal, follow the signs to the terminal.
• From the Catoosa / Claremore areas, take I-44 W, merge right onto I-244 W, from I-244 W, exit HW 11 W via exit 12B towards Tulsa International Airport. Take the exit marked Virgin Street/Airport Terminal. Follow the signs and turn right on Airport.